You are here: Home » Blog » Roll Forming Machine Equipment Control Software

Roll Forming Machine Equipment Control Software

Time:2018-09-26

Roll forming machine equipment uses high-level active control software to complete the production information processing. Convenient operation, thorough use, feeding, pressing, dispensing, heating, trimming, slotting, cutting and forming.
Roll forming machine equipment uses high-level active control software to complete the production information processing. Convenient operation, thorough use, feeding, pressing, dispensing, heating, trimming, slotting, cutting and forming. The active tile pressing machine can be used by its own equipment, but it needs manual loading, unloading of blanks, and can also be equipped with active loading racks and unloading robots and extruders, cutting machines, blanking machines and Watt conveyor lines. The production line is completely free of manual operations. The entire unit’s active control system uses a highly integrated network to make the active system more advantageous. It also has operation, protection, protection and mechanical adjustment, and mold replacement is easy.
Our roll forming machine equipment uses fine low-speed metering pump, frequency control, (or stepless speed regulation), computer control, accurate measurement. The workbench has six processes, (ie, the hexagonal runner). The table is flipped. In addition to the first-level mechanical indexing and positioning, a set of fine positioning organization is also provided to ensure the accurate positioning of the table die during each stamping process. The sliding table of the upper mold of the device is the layout of the box body, the guide rail of the sliding table and the upper rail of the fuselage, the touch length is large, and each stamping of the upper mold, the process has a secondary punching of the mud blank, that is, the first pressing tile blank of the upper mold is in place. After that, the upper mold rises by 10mm, so that the mud blank is fully exhausted, and the upper mold presses the tile blank again to return to the highest position. Therefore, the color steel equipment has a long service life and the limited product quality is good.
The debugging method for the deviation of the pressure plate of the color steel tile pressing machine, such as the plate running to the right, the left corner of the pad (feeding frame), or the bottom of the right side, the first axis runs off the bottom of the shaft, and the upper shaft follows the bottom axis. whereabouts. The active tile pressing machine is a hydraulic press used for quasi-determining type limitation of the rough blanks extruded and cut by the vacuum screw extruder when the glazed tile is produced by the wet method. Today, many of the roofs are constructed using color steel tile press equipment, and the color steel tile press equipment has a single layer and a sandwich. Some people say that single-layer color steel tiles are steaming in the summer, and people can’t stand the heat. They don’t keep warm in winter, and they are too cold. Even if they do the smallpox, they are not good. The real use of single-layer color steel tile presses will have a simple way to cool down in summer.
Previous: Debugging method of color steel equipment Next: Color steel tile equipment assembly in welding stress


Copyright 2018 © Zhangjiagang City Quanlong Machinery co., ltd.