In the installation of sandwich panel machine, self-tapping screws are drilled, hand data, electric saw cutting or other operations will leave metal shavings on the roof or adjacent areas. These things must be timely from the roof, flooding boards, gutters The surface is cleaned to be stained by the surface of the sandwich panel machine by the oxidized surface of the solid steel-free composite board, causing corrosion of the steel sheet.
After the color plates of the sandwich panel machine are pressed on the construction site, they must be stacked and covered with tarpaulin. If the rain water is damp, the plates must be immediately separated, wipe the surface moisture with a dry cloth, and then stack the plates. Keep the air flowing and dry the surface.
Quanlong machinery is a manufacturer and supplier in China, The products made by sandwich panel machine are widely acclaimed.
In the operation and use of the sandwich panel machine, in order to shorten the construction period, the flat bar and the sling method are used to hang the assembly line of the sandwich panel machine to the roof in a lump, and then manually divide the work. When carrying the color plate, you must use dry and clean gloves, do not drag the steel plate and other things on the surface of the color plate. The staff on the roof should wear soft rubber shoes, and the sand and dirt should be cleaned in front of the house. When walking along the longitudinal direction of the roof panel, walk in its slot. When walking along the slot, try to distribute the load evenly on the foot instead of the heel or toe.
