How to maintain the sandwich panel production line? The first is the maintenance of our sandwich panel production line. Whenever the oil is changed, the filter should be replaced or thoroughly cleaned. The machine tool has other alarms such as alarms or oily and other abnormalities. It should be replaced on the fuel tank. The air filter is inspected and cleaned every 3 months, preferably 1 year.
Followed by the maintenance of the hydraulic circuit of the sandwich panel production line, we have to check the oil level of the fuel tank every week. If the hydraulic system is repaired, it should also be checked. The oil level should be filled with hydraulic oil below the oil window; the system oil temperature should be 35 °C~ Between 60 ° C, it should not exceed 70 ° C. If it is too high, it will cause deterioration of oil quality and accessories. The hydraulic oil used in this machine is ISO HM46 or MOBIL DTE25; after the new machine is operated for 2000 hours, the oil should be changed. After every 4000 to 6000 hours of operation, the oil should be changed. For each oil change, the fuel tank should be cleaned.
There is also the maintenance of the hydraulic components of the sandwich panel production line. The hydraulic components (substrate, valve, motor, pump, oil pipe, etc.) are cleaned every month to prevent dirt from entering the system and the detergent cannot be used. After using the new machine for one month, check the oil pipes. There is no deformation at the bend. If there is any abnormality, it should be replaced. After two months of use, the joints of all the accessories should be tightened. When this work is done, it should be shut down and the system has no pressure.
