You are here: Home » Blog » How to Distinguish between Roll Forming Machine and Sandwich Panel Machine

How to Distinguish between Roll Forming Machine and Sandwich Panel Machine

Time:2018-10-23

Many new customers of roll forming machines and sandwich panel machines are indistinguishable and have a concept. I will introduce two sentences briefly! The sandwich panel machine is the iron sheet directly pressed through the tiler for use as a simple building roof and roof. The compound machine is a set of assembly lines, including a tile press/composite mainframe/cutting system. The pressed product is called a sandwich composite board. As the name implies, the upper layer is iron, and the middle layer is foam or rock wool and glass wool for sandwich. It has the advantages of heat preservation and sound insulation.

Door Frame Roll Forming Machine
Find the center of the first row and the last row of the roll forming machine, then tighten the locks on both sides, pull a straight line in front of and behind the center of the middle wheel, and adjust the gap between the upper and lower shafts. Adjust the machine along the line. The debugging method for the deviation of the pressure plate of the sandwich panel machine, such as running the plate to the right, the left corner of the pad (feeding frame), or the bottom of the right side (the first axis runs off the bottom of the shaft, the upper shaft falls with the bottom axis).
The sandwich panel machine adopts high-strength steel plate through cold pressing forming, has uniform wall thickness, adjustable size and large compressive strength. C-shaped steel after cold forming is light in size. However, it is in line with the force characteristics of the roofing slats, so that the mechanical properties of the steel are fully utilized. The C and Z steel bar can reduce the weight of the building roof. Reduce the amount of steel used in engineering. Therefore, it has become a cost-effective steel. It is a new building material that replaces traditional steel sandals such as angle steel, channel steel and steel pipe. The use of C-shaped steel strips in combination with lightweight metal tiles is the best choice for light steel construction.


Copyright 2018 © Zhangjiagang City Quanlong Machinery co., ltd.